Panasonic WV-ASC970 - - Manual (Page 31)

31
■
Defroster Control
The following procedure is available when a selected
camera (housing) is equipped with a defroster.
1. Select the desired monitor and camera. (Refer to
p. 27 Monitor Selection and Camera Selection.)
2. Pressing the DEF ON/OFF button.
The defroster will be activated.
3. To deactivate the defroster, press the DEF ON/OFF
button while holding down the SHIFT button.
Note:
• The defroster will be automatically deactivated
when the temperature reaches the specified
degrees.
■
Auxiliary Control
You can control one or two auxiliary control devices.
The following procedure is available when an auxiliary
control device, such as Receiver WV-RC150, is con-
nected to a system unit.
● Operating Procedure
1. Select the desired monitor and camera. (Refer to
p. 27 Monitor Selection and Camera Selection.)
2. Press the AUX 1 ON/OFF or AUX 2 ON/OFF but-
ton.
The auxiliary control device, associated by the
installation wiring, will be activated.
3. To quit the auxiliary control, press the AUX 1 ON/
OFF or AUX 2 ON/OFF button while holding down
the SHIFT button.
MON Def On CAM
0123 Unit:01 00512
MON Def Off CAM
0123 Unit:01 00512
MON Aux1 On CAM
0123 Unit:01 00512
MON Aux2 On CAM
0123 Unit:01 00512
MON Aux1 Off CAM
0123 Unit:01 00512
MON Aux2 Off CAM
0123 Unit:01 00512