Panasonic WV-ASC970 - - Manual (Page 37)

37
Alarm Control
■
Alarm Selection
To control alarm behaviors, you need to select a
desired alarm number.
1. Select a desired alarm number by pressing the
numeric buttons.
2. Press the ALARM/ALM SUSPEND button.
The current status of selected alarm will be dis-
played on the LCD.
Armed: The system is armed for alarm response.
Active: Alarm has been triggered and activated
assigned alarm response.
Ack: Alarm is acknowledged and an operator can
control the alarm action.
Reset: Activated alarm is reset, but the alarm
device is still active.
Disarm: The system is disarmed for alarm
response.
Clear: Auto arming is not set in the admin console.
3. To select the next alarm number, press the + but-
ton.
To select the previous alarm number, press the –
button.
MON 1 CAM
0123 Unit:01 00512
MON Alarm00001 CAM
0123 Armed 00512
■
Alarm Arming Control
1. Select a desired alarm. (Refer to Alarm Selection.)
2. Every time you press the ALARM/ALM SUSPEND
button, the selected alarm will be armed or dis-
armed. When an alarm is disarmed, the LCD dis-
play will become as follows.
3. To exit the alarm mode, press the CLEAR button.
The LCD display will become as follows.
To arm or disarm all alarms
Every time you press the ALARM/ALM SUSPEND but-
ton while holding down the SHIFT button, all alarms
will be armed or disarmed.
Note:
• To arm or disarm an alarm, activate Allow Disarm
for the alarm. (Refer to the Admin Console User's
Guide for details.)
MON Alarm00001 CAM
0123 Disarm 00512
MON Alarm Exit CAM
0123 Unit:01 00512
MON CAM
0123 ALL Arm 00512
MON CAM
0123 ALLDisarm 00512