Panasonic WV-ASC970 - - Manual (Page 38)

38
■
To Operate Alarm-related
Camera (ACK)
You can operate the camera associated with the alarm
action as follows:
1. Perform Step 1 and 2 of Alarm Selection.
2. Enter a desired alarm action number by pressing
the numeric buttons.
Note:
• If you skip this step, Alarm Action #0 will be speci-
fied.
3. Press the ACK button.
"Ack:n" will appear on the LCD.
4. Control the cameras with the system controller.
(Refer to p. 29 Camera Site Accessories Control.)
Note:
• To select another alarm, press the ALARM/ALM
SUSPEND button. The ACK status will be can-
celed (cancelled). Then, enter the alarm action
number by pressing the numeric buttons, and
press the ACK button again.
MON 9 CAM
0123 Active 00512
MON Alarm00001 CAM
0123 Ack:9 00512
■
To Cancel Alarms
1. Perform Step 1 to 2 of p. 37 Alarm Selection.
2. Press the ALM RESET/ALM ALL RESET button to
reset the alarm. "Reset" will be displayed on the
LCD.
Note:
• To reset all the alarms at a time, press the ALM
RESET/ALM ALL RESET button while holding
down the SHIFT button.
• After the alarm is deactivated, "Armed" or
"Cleared" will be displayed on the LCD.
MON Alarm00001 CAM
0123 Reset 00512
MON Alarm00001 CAM
0123 ALL Reset 00512
MON Alarm00001 CAM
0123 Armed 00512
MON Alarm00001 CAM
0123 Cleared 00512