Changing the settings of the computer alone, Clock setting – CatEye CC-GL10 [Stealth 10] User Manual
Page 22
22
Time zone list
Select the code for the city nearest from
your current location.
MODE
Switch the display
* For details, see “Time zone list” (page 6).
Daylight saving time
Select whether to use the daylight saving time.
ON Moves the clock 1 hour ahead.
OFF Displays in regular clock
MODE
ON ↔ OFF
Clock setting
Change the settings of the time zone, daylight saving time, and the
clock display format.
* With this unit, it is not necessary to set the clock/date, since they
are synchronized after receiving GPS signal.
When you travel back and forth between two
regions, you can easily return the time zone to
the original one.
* For details, see “Changing the time zone”
(page 23).
Changing the settings of the computer alone
Pressing the MENU button with the measurement screen displayed changes to the menu
screen. Various settings can be changed on the menu screen.
* After you change the setting, be sure to press the MENU button to register it.
* Leaving the menu screen without any operation for 1 minute returns to the measurement
screen.
Clock display format
Select the display format of “12h” (12
hours display) or “24h” (24 hours display).
MODE
12h ↔ 24h
* Date and clock are acquired from GPS signal;
therefore, it is not necessary to enter them.
MODE
MODE
MODE
MENU
MENU
MODE
MODE
MODE
MODE
MODE
MODE
MENU
MODE
Clock setting
(on the right of
this page)
Measurement
screen
Night-time
setting
(page 24)
Setting the
record interval
(page 24)
Entering the
total distance
(page 24)
Selecting the
speed unit
(page 25)
From “Selecting the speed unit” (page 25)
To “Night-time setting” (page 24)
(press & hold)
(press & hold)
Press and
hold for 4 sec.
Changing the time zone (shortcut)
Menu top screen
(press & hold)
Register
the setting
Register
the setting
Changing
the settings
(press & hold)