Operating the computer [measuring screen, Enduro eng 4 power-saving function, Calorie consumption – CatEye CC-ED400 [Enduro] User Manual

Page 4: How to calculate the carbon offset, Switching computer function, How to change tire size, How to set clock, Starting/stopping measurement, Resetting data

Advertising
background image

ENDURO

ENG

4

Power-saving function

If the computer has not received a signal for 10 minutes, power-saving
screen will activate and only the clock will be displayed. When the com-
puter receives a sensor signal, the measuring screen reappears.

MODE

Calorie Consumption

This computer measures the calorie consumption by integrating the value
calculated from the speed in every second. Check it as a reference value.

Speed

10 km/h [mph]

20 km/h [mph]

30 km/h [mph]

Kcal per hour

67.3 kcal

[155.2 kcal]

244.5 kcal

[768.2 kcal]

641.6 kcal

[2297.2 kcal]

How to calculate the Carbon offset

The Carbon offset are calculated as follows.
Trip distance (km) x 0.15 = Carbon offset (kg)
* This factor of 0.15 is determined by applying the average value of the

overall gasoline-powered passenger cars in 2008 to the equation of the
“Carbon offset from 1 km drive of a gasoline-powered car” described
on the website of the Ministry of Land, Infrastructure and Transport and
Tourism.

Operating the computer [Measuring screen]

Switching computer function

Pressing the MODE button switches the measurement data at the bottom
in the order shown in the following fi gure.

*1 : When TM exceeds about 27 hours, or DST exceeds 999.99 km, .E

will appear. Reset the data.

Current speed
0.0 (4.0) – 199.9 km/h
[0.0 (3.0) – 124.9 mph]

Pace arrow
Indicates if the current speed is faster or
slower than the average speed.
( Faster, Slower)

Speed unit

Measuring screen

Power-saving screen

10 minutes

or

How to change tire size

Display the Total Distance (ODO) and press
the SET button to change the tire size.
The setting method is the same as for “Pre-
paring the computer-3” (page 3).

How to set clock

In the clock mode, press SET button on the
back, and the display enters clock setting
mode.
The setting method is the same as for “Pre-
paring the computer-4” (page 3).

TM

Elapsed Time

0:00.00 – 9:59.59

DST

Trip Distance

0.00 – 999.99 km [mile]

AV

Average Speed (*1)

0.0 – 199.9 km

[0.0 – 124.9 mph]

MX

Maximum Speed

0.0 – 199.9 km/h

[0.0 – 124.9 mph]

CAL

Calorie Consumption

0 – 99999 kcal

CO2

Carbon offset

0.00 – 999.99 kg

ODO

Total Distance

0 – 99999 km[mile]

Clock

0:00 – 23:59

[1:00 – 12:59]

MODE

(Press & hold)

SET

SET

Starting/Stopping measurement

Measurements start automatically when the bicycle is in motion.
During measurement, km/h or mph fl ashes.

START

STOP

Resetting data

Pressing and holding MODE on the measuring screen
returns the measurement data to 0.
* The total distance (ODO) is not reset.

Start measurement

Stop measurement

Advertising