CatEye CC-TR100 - Manual (Page 10)

CC-TR100 17 16 CC-TR100
5
START/STOP/ENTER
LAP
2
3
START/STOP/ENTER
LAP
DATE
MXS ODO
TTM
MODE- 2 MODE- 2
MODE- 2
MODE- 2
DST-1
TM-1
AVS 1
A M
A M
MODE- 1
MODE- 1 MODE- 1
kcal kcal kcal
Av HR
kcal
MODE- 1
MODE- 1
Total
1 2
3 4
5
START/STOP/ENTER
LAP
START/STOP/ENTER
LAP
Switching displayed data
NOTE: For details of each data, see “Measured data” on page 20.
• Switching data on Display-2 and Display-3
Pressing MODE-1 switches data on both Display-2 and Display-3.
Speed Heart Rate
Cadence
Speed
Average
Heart Rate
Calorie
consumption
Speed
Maximum
Heart Rate
Maximum
Cadence
Calorie
consumption
Pedaling Count
2 Sec.
MODE-2 button
Elapsed Time
Trip Distance
Total Time
Total Distance
Clock
Average Speed
Date
MODE-1 button
Speed
Calorie
consumption
Maximum Speed
Calorie
consumption
Average
Cadence
When the MODE-1 button is held for two seconds, Display-3 shows the total number of
pedal revolutions. The data on Display-2 does not change.
Pressing MODE-1 again, returns Display-3 to the cadence data.
NOTE: When the optional power unit is used, the MODE-1 button also switches Display-4
together with other displays. For details, see the instruction manual for the power
unit.
• Switching data on Display-5
Pressing MODE-2 switches the data on Display-5.
Basic operations
TR100 measures data when the bicycle starts moving. You can view various data by pressing
the MODE-1 and MODE-2 buttons. You can also record lap data up to 199 laps or intervals.
Main computer functions
The main screen has 5 windows which display different types of data. Pressing the MODE-1
and the MODE-2 buttons change the displayed information, as shown in the illustration. The
displayed items of data are as follows:
• Display-1 .......... Displays the current speed.
• Display-2 .......... Displays heart rate data. (Press MODE-1 to cycle through data shown on
Display-3.)
• Display-3 .......... Displays cadence data. (Press MODE-1 to cycle through data shown on
Display-2.)
• Display-4 .......... Displays the calorie consumption in kcal.
When the power unit is used, power-related data is displayed. For details,
see the instruction manual for the power unit.
• Display-5 .......... Displays other data. (Use MODE-2 to cycle through this data.)
NOTE: For more information on displayed items of data, see “Measured data” on page 20.
START / STOP / ENTER
button
Starting / stopping main measurement
When you begin riding, the elapsed time starts and the speed unit will flash.
The total distance, maximum speed, maximum heart rate and maximum cadence are updated
independently of starting/stopping of the main measurement.
NOTE: To manually start and stop measurement using the START/STOP/ENTER button, see
“Auto-mode” on page 30 for instruction on turing on or off the auto-mode.