CatEye CC-TR100 - Manual (Page 14)

CC-TR100 25 24 CC-TR100
Beep!
Beep!
Beep!
Beep!
Beep!
Beep!
Auto-mode (auto-start / stop)
When the Auto-mode function is on, the computer automatically starts and stops measuring
with the movement of the wheel. When the auto-mode function is turned on, an
icon
appears on the display.
Pace functions
The pace arrow icons on Displays 1, 2 and 3 indicate whether the current speed, heart rate and
cadence are above or below the respective average values.
: Appears when the speed (heart rate, cadence) is above the average.
: Appears when the speed (heart rate, cadence) is below the average.
: Appears when the speed (heart rate, cadence) equals the average.
Not illuminating : When the speed (heart rate, cadence) is zero.
Cadence
Current speed Heart rate
60 80 100 120 140 160 180 200
bpm
Heart rate
Zone.1
100 - 120 bpm Zone.1
Zone.2
120 - 140 bpm Zone.2
Zone.3
140 - 160 bpm Zone.3
Zone.4
160 - 180 bpm Zone.4
Target training zone
Heart rate zone
Target alert setting
Functions of main unit
Heart rate zone / Cadence zone
You can set target heart rate and cadence zones and view the time in zone data at any time.
The zone value will flash when the target zones are on and the value is out of your target zone.
An alarm will sound if the sound feature is turned on.
• Heart rate zone alert
Four heart rate zones can be set with range and target. The range of each zone may overlap.
The zone value will flash when the target zones are on and the value is out of your target
zone. An alarm will also sound if the sound feature is turned on.
You can check the time in and out of the heart rate zones, set the target and change the
range in “Heart rate zone (page 36)” on the menu screen for each zone.
For example, if your target is
140 to 160 bpm, turn on the
target in Zone 3 as shown at
right.
If the heart rate goes out of this
range during measurement, the
heart rate on Display-2 flashes.
Cadence zone alert
Heart rate zone alert
Alert when both heart rate and
cadence go out of respective zones
• Cadence zone alert
TR100 has one cadence zone besides the four heart rate zones.
The zone value will flash when the target zones are on and the value is out of your target
zone. An alarm will also sound if the sound feature is turned on. You can check the time in
the cadence zone, set the target and change the range in “Cadence zone (page 34)” on the
menu screen.
NOTE: When both the heart rate and the cadence are turned on and go out of the respective
zones, the heart rate and cadence values flash.