9connecting with pc, Installing msc-unit – CatEye MSC Series Download Kit User Manual
Page 9
e-Train Data™
9
Connecting with PC
Connect the cable of the interface unit to your PC’s RS232C terminal (serial port).
Caution
•
If the cable is not securely connected to the terminal, the interface unit might fail to transmit
data.
•
The 9-pin connector is applicable to IBM (or IBM PC/AT) computers. For other computers,
you may need an adapter.
Installing MSC-unit
1. Place your MSC-unit on the interface unit as illustrated.
Hook the bottom side
1
of the unit, and push the other side
2
. The unit clicks into position.
2. Turn on the power switch
3
and see if the battery indicator turns on.
Removing MCS-unit
After download is completed, turn off the switch and push the release-button. The MSC-unit will
pop out.
PC’s RS232C terminal
(serial port)
Release-button
Power switch
Hook
Stage
Battery indicator