Merrychef eikon e4s - Manual (Page 20)

20 Service & Parts Manual original Instructions
Part Number 32Z3871 US
Issue 3
PR
ODUC
T
DE
T
AILS
K
L
M
J
9.8 USB oven programs (J)
IMPORTANT: Downloading from a USB will clear
all the existing programs.
Check that the key has the correct number/code
for the programs you want to load into the oven
memory (1 ‘.cbr’ + ‘autoupd.ate’).
9.8.1 With the oven switched off , slide the Merrychef
badge (oven front top right) upwards and insert the
USB Memory Stick into the slot.
9.8.2 Switch the oven ON.
9.8.3 The fi les automatically download from the USB
showing the progress and confi rmation screens for
the update.
9.8.4 On completion the oven displays the start up
screen.
9.8.5 Remove the USB and keep in a safe place.
Reposition the USB cover.
9.9 Temperature Band (K)
9.9.1 Select the ‘Temp Band’ symbol at which the oven
controls i.e. ±10°C.
9.9.2 Select the required temperature band checkbox,
shown by a green tick. Note; although the lowest
practical Temp Band should be used, if the set oven
temperature falls by more than the selected Temp
Band, the ready to cook mode and Temp Band are
deactivated until the oven reaches the preheat
temperature.
9.10 Change Password (L)
9.10.1 Select the key symbol to change the oven
passwords.
9.10.2 Select the oven Settings or Service symbol.
9.10.3 Enter the existing password and select OK to
confi rm.
9.10.4 Enter the new password, select OK.
9.10.5 Confi rm new password, select OK.
9.11 Screen saver (M)
9.11.1 Select the ENABLED checkbox to switch the
screen saver ON or OFF.
9.11.2 Select the time box below to enter a time delay
on the keypad from 1 to 60 minutes before the screen
saver starts and select OK to confi rm.