Vaddio CeilingVIEW HD HideAway - Manual (Page 14)

CeilingVIEW HD HideAway Manual
CeilingVIEW HD HideAway Manual, Document Number 342-0289 Rev. B Page 14 of 24
STEP 6: Controlling the CeilingVIEW HD HideAway with the following methods:
1) Vaddio IR Remote Commander (Setting the Upper and Lower Lift Stops)
2) Other Vaddio Products
3) Control Systems and Videoconferencing Codecs
Vaddio IR Remote Commander Control:
Overview: The Vaddio IR Remote Commander, included with all Vaddio ClearVIEW HD PTZ Cameras and
packages, provides for simple IR remote control of the CeilingVIEW HD HideAway and the Vaddio ClearVIEW HD
PTZ Camera functions. The IR Remote Commander is also used to calibrate and set the upper and lower lift
stops on the Camera Lift Bracket ensuring the platform bracket stops in precise alignment with the Trim Ring
Assembly.
Important Note: The IR Frequency of the CeilingVIEW HD HideAway Motorized Back Box Assembly
and the Vaddio ClearVIEW HD PTZ Camera must match in order to be controlled by the Vaddio IR
Remote Commander! See Step-by-Step Assembly Instructions for Installation of a Vaddio
ClearVIEW HD PTZ Camera into the CeilingVIEW HD HideAway Motorized Back Box
Assembly/STEP #2: N through O (Pg 9) for more information.
1) Vaddio IR Remote Commander: Provides IR remote control of the CeilingVIEW HD HideAway Back Box
Assembly and the Vaddio ClearVIEW HD PTZ Camera functions.
CeilingVIEW HD HideAway Functions:
 Power On-Off for the CeilingVIEW HD HideAway and Vaddio ClearVIEW HD PTZ Camera functions
Figure 22: Vaddio IR Remote Commander
Power On: Lowers the
CeilingVIEW HD HideAway and
turns on the Vaddio HD PTZ
Camera.
Power Off: Raises the
CeilingVIEW HD HideAway and
turns off the Vaddio HD PTZ
Camera.
Back Light
Compensation:
On/Off
Data Screen:
For OSD where available
Select IR Frequencies:
Select the same IR Setting that
the CeilingVIEW HD HideAway
and Vaddio HD Camera have
been set to (1, 2 or 3).
Auto Focus:
On-Off
Pan/Tilt Controls:
Burgundy buttons
Manual Focus Control:
Near and Far
6-Presets:
Stored in the
camera for recall
Preset Set:
Press and hold,
touch Preset 1
through 6 to set
preset
Standard Pan:
Direction
Zoom Speed:
Slow and Fast
Preset Erase
Pan/Tilt Reset
Reverse Pan