Vaddio EVI-D80D90 Tech - Manual (Page 4)

4
Connection
Notes
 You cannot connect your Color Video Camera to a
computer that is not equipped with either video input
or an S-Video input connector. You might not be able
to use your existing computer with your Color Video
Camera unless you provide the computer with a
video capture board and/or software. Consult your
computer dealer or manufacturer for details.
 Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
 Do not make VISCA RS-232C and RS-422
connections at the same time, as this may cause
malfunctions.
1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 26.
S-Video cable (not supplied)
to S-Video
input
to VISCA IN
VISCA cable (not supplied) 1)
to RS-232C
Video cable
(not supplied)
AC power adaptor
(supplied)
to DC 12V
to AC outlet
Power cord (supplied)
to VIDEO
to S VIDEO
Computer, TV or VCR
with a video input
jack
to VISCA RS-422 2)
to Video
input
to VISCA OUT
To VISCA IN of other
EVI-D80N/D80P/
D90N/D90P (when
connecting to more
than one camera)