Vaddio EVI-D80D90 Tech - Manual (Page 7)


Locations of Controls
 PAN-TILT buttons
Press the arrow buttons to perform panning and tilting.
Press the HOME button to face the camera back to the front.
When the menu is displayed, use  or  to select the menu
items and  or  to change the set values. The selected
setting menu is displayed, by pressing the HOME button
when the main menu is displayed.
The Pan/tilt speed will slow down when the camera is
zoomed, in order to allow precise positioning.
 L/R DIRECTION SET button
Hold down this button and press the REV button to change
the direction of the camera movement opposite to that
indicated by the arrow of the / buttons.
To reset the direction of the camera movement, press the
STD button while holding down this button.
 POWER switch
Press this button to turn on/off the camera when the camera
is connected to an AC outlet.
 BACK LIGHT button
Press this button to enable the backlight compensation.
Press it again to disable the backlight compensation.
 POSITION buttons
Hold down the PRESET button and press button 1 to 6 to
store the current camera direction, zooming, focus
adjustment and backlight compensation in the memory of
the pressed number button.
To erase the memory contents, hold down the RESET
button and press button 1 to 6.
Note
These buttons do not function when the menu is displayed.
 PAN-TILT RESET button
Press this button to reset the pan/tilt position.
 ZOOM buttons
Use the SLOW button to zoom slowly, and the FAST button
to zoom quickly.
Press the T (telephoto) side of the button to zoom in, and
the W (wide angle) side to zoom out