Vaddio WallVIEW HD-22 and HD-30 DVI-HDMI - Manual (Page 4)

WallVIEW HD-22 and HD-30 SR Systems
WallVIEW HD-22 and HD-30 DVI/HDMI SR Cameras Systems - Document Number 342-0644 Rev A Page 4 of 24
O VERVIEW
The remarkable Vaddio PowerVIEW HD-22 and HD-30 high
definition PTZ cameras are available in the super-versatile Vaddio
WallVIEW DVI/HDMI SR (short range) system packages. The
WallVIEW HD-22 DVI/HDMI SR and the WallVIEW HD-30
DVI/HDMI SR feature 22X and 30X power zoom optics respectively.
These cameras use the latest
Maicovicon MOS, 1/2.8-Type,
progressive scan image sensors, which provide for better light
sensitivity, increased noise reduction and lower power consumption
than cameras with either CCD or CMOS image sensors. This
advanced MOS image sensor captures realistic textures, vivid
colors and delicate gradations that are comparable to 3-chip
camera performance.
Both the HD-22 and the HD-30 provide matchless low-light
capabilities with a minimum illumination rating of an amazing 0.4 lux
(color) and 0.04 lux (B/W). Equipped with a 2.2 megapixel MOS
sensor, the cameras deliver native 1080p/60 high definition video
resolution and superior color reproduction for use in any
professional A/V presentation, videoconferencing, House of
Worship, education, live event and industrial applications.
The HD-22 has a powerful 22X multi-element glass zoom lens (f=4.3mm to 94.6mm) and works exceptionally in
large rooms. However, the premium optics also provides a super-wide horizontal field of view of 65.2º, which
works very well in small room video applications. The HD-30, as one can imagine, has a robust 30X optical
power zoom lens that enables the capture of brilliant and detailed video images even in the largest rooms.
The cameras output multi-format HD video in both analog component (YPbPr), HDMI and differential formats in
HD resolutions of 1080p/59.94, 1080p/50 1080p/29.97 1080p/25, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 and
progressive SD resolutions of 480p/59.97 and 576p/50. Both cameras are offered in WallVIEW DVI/HDMI SR
packages with the Quick-Connect DVI/HDMI SR Interface that uses HSDS™ for distribution of video, power and
control over Cat-5 cable up to 100’ (30.48m) and are capable of outputting analog component YPbPr and HDMI
concurrently from the Quick-Connect interface. The WallVIEW HD-22 and HD-30 DVI/HDMI SR camera systems
represent an exceptional value and are superb performers for even the most demanding video applications.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. The use of a power supply other than the one provided or
outdoor operation hasn’t been tested and may damage the device and/or create an unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of
electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for proper pin-outs prior to use and connection to Vaddio product.
Image: PowerVIEW HD-22 or HD-30 PTZ Camera (above)
and the Quick-Connect DVI/HDMI SR Interface (below)