Vaddio WallVIEW HD-22 and HD-30 DVI-HDMI - Manual (Page 9)

WallVIEW HD-22 and HD-30 SR Systems
WallVIEW HD-22 and HD-30 DVI/HDMI SR Cameras Systems - Document Number 342-0644 Rev A Page 9 of 24
Q UICK -C ONNECT DVI/HDMI SR I NTERFACE
Image: Rear Panel Connectors and Features
1) Power Light: Blue LED Power Indicator
2) 24 VDC Power Port: Coax Power Connector, 5.5mm OD x 2.5mm ID, Positive Center.
3) Recessed Color Space Conversion Switch: Toggles between HDMI YCbCr and sRGB (RGBHV) color
space. Change the color space to accommodate either HDMI or DVI-D monitors.
4) RS-232 Control Input (from joystick controller, codec or control system).
5) To
Camera: RS-232 Control to & from Camera and IR signals returned from the camera.
6) Daisy Chain Control Port: Daisy Chain Control Emulation (DCCE) output to next Quick-Connect DVI/HDMI
SR Interface (does not function with the AutoTrak System).
7) IR Output Port: Non-modulated (for hard connections) and Modulated for use with IR emitters.
8) DVI-D
Output: High Definition Multimedia Interface (HDMI) Transmitter, HDMI (v 1.3 with deep color) and
DVI v 1.0 Compliant - use Recessed Color Space Conversion Switch ③ to toggle between HDMI YCbCr and
sRGB (RGBHV) color spaces to suit your monitors
9) YPbPr Output: Analog Component Video Output on DE-15F (HD-15F) Connector, Resolutions up to
1080p/60 with monitor support.
10) EZCamera Power & HD Video Port: Supplies power to camera and returns HD video from the camera via
Cat-5e. Maximum distance on the CAT-5e cable is 100’ (30.5 m).
Image: Quick-Connect DVI/HDMI SR Interface Front Panel
1) Front Panel Screws (x 4):
Remove and reuse these screws when mounting to the 998-6000-003 Optional 1-RU Rack Panel for Two (2)
½-Rack sized enclosures. Optional panel holds two (2) interfaces side-by-side in 1-RU space.
2) Product Info:
Logo, Name, Part Number FCC and CE Marks and standard FCC disclaimer language (exciting stuff)...
① ②
③ ④ ⑤ ⑥ ⑦ ⑨ ⑧ ⑩
① ②