Vaddio WideSHOT WallVIEW SR - Manual (Page 12)

WideSHOT WallVIEW SR
WideSHOT WallVIEW SR System Document Number 342-0695 Rev B Page 12 of 20
IR SHOT C OMMANDER R EMOTE C ONTROL
Spatially Efficient IR Remote Controller for ZoomSHOT and WideSHOT Camera Systems
The Vaddio IR SHOT Commander was designed to work with the Vaddio ZoomSHOT and WideSHOT camera
systems and is compatible with the PowerVIEW™, ClearVIEW™ cameras and the WallVIEW™ camera system
packages. The Vaddio IR SHOT Commander is compatible with the following Vaddio camera packages:

ZoomSHOT and WideSHOT Camera Systems (shipped with these products)

Vaddio ClearVIEW HD-18, HD-19, HD-20, PowerVIEW HD-22, HD-30 and REVEAL™ HD-18 (limited functionality)
The Vaddio IR Shot Commander is also compatible with the Sony® EVI series and the BRC series PTZ cameras.
Basic Instructions:
 Pick the IR Frequency to match the dip switch setting of the camera. Operate the remote (but not too fast).
 Note: The Pan/Tilt/Zoom controls are not used with the manual lens of the WideSHOT HD Camera.
Image: Vaddio IR SHOT Commander Hand-held IR remote
ZOOM OUT ZOOM I
P-STORE IR 1
PRESET 1
Power On/Off
Camera Standby
OSD On Screen Display Menu
(if applicable)
Arrow Keys X 4
 Pan Left, Pan Right,
 Tilt Up, Tilt Down
 Menu Navigation
 Pan Functions Not Used
with WideSHOT
OK, Enter, Select and
Camera Home
Zoom Camera IN (telephoto)
Zoom Functions Not Used with
WideSHOT
Zoom Camera OUT (wide)
Zoom Functions Not Used with
WideSHOT
Recalls ZoomSHOT Preset 1
or Preset 2 (for Color and
CCU Scenes)
*WideSHOT uses a manual lens
Select IR Frequencies (3)
Allows up to 3 cameras to
be controlled in a room with
one (1) IR Remote
Note: Camera dip switches
set IR frequency.
Preset Button - Setting Presets
 Move the camera into position
 Push and hold P-STORE button
 Touch buttons 1 or 2 to set Preset
Quick Specs
IR Range 20’ to 30’ (6m to 9m)
Batteries 2 x AAA (Batteries not shipped
with 998-2101-001)
Keys (buttons) 15 Silicone Rubber Keys
Dimensions
L x W x H 4.53” (115mm) x 1.57” (40mm) x
1.1” (28mm)
LED Indicator Red LED Illuminates when
transmitting IR, Brightness
indicates battery strength
Compatible
Cameras Ships with ZoomSHOT and
WideSHOT. Compatible with all
Vaddio ClearVIEW, PowerVIEW
cameras (limited function set)
and most Sony BRC & EVI
cameras, but with limited
functionality
Red LED indicates IR transmission and
the brightness indicates battery strength