Vaddio WideSHOT WallVIEW SR - Manual (Page 15)

WideSHOT WallVIEW SR
WideSHOT WallVIEW SR System Document Number 342-0695 Rev B Page 15 of 20
WideSHOT WallVIEW SR General Specifications:
WideSHOT Camera System
Part Numbers WideSHOT WallVIEW 999-6910-000 (North America)
WideSHOT WallVIEW 999-6910-001 (International)
Image Sensor 1/3-Type Progressive Scan CMOS Sensor with 1.3 Megapixels
Video Output Resolutions HD: 1080/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50
SD: 480p/59.94 & 576p/50
Lens/ Focal Length Approx. 3X Optical Zoom, 3.3mm to 10.mm manual focus
Horizontal Viewing Angle 82.2° Wide End to 3.2° Tele End, 27.4° Tele End - 16:9 Format (94.3° diagonal)
Video S/N Ratio >50 dB
Minimum Illumination 0.2 LUX (1/30 Shutter Speed) Color
Serial Control Protocol RS-232 Serial Control
Manual Pan/Tilt Range Pan: Limited to service loop of cabling, yoke and base are mechanical only
Tilt: ± 30°
Invertible for Ceiling Mount
Preset Positions Manual
Tally Light Red LED available through RS-232 Control
Camera Connectors Two (2) RJ-45 Jacks:
 EZ-Power VIDEO RJ-45 Jack for use with Quick-Connect - Supplies power to the camera and
returns differential HD video from the camera
 RS-232 RJ-45 Jack (RS-232 Communication and IR Out (with Quick-Connect -SR Interfaces)
HD Video Select 16-Position Rotary Switch: Used to set HD Video Resolution Output
Camera Settings 6-Position Dip Switch: For IR Freq., Baud Rate 9600, Image Flip & Test Bars
16-Position Rotary Switch for Output Resolution Settings
Thin Profile Wall Mount 535-2000-237 (Provided with WideSHOT WallVIEW Systems)
Black powder coating, Sized to fit on 1-gang wall box or drywall mounting
User Controls IR SHOT Commander with OSD for set-up and RS-232
Materials & Weight Aluminum & Steel, Weight = 2.45643 lbs. (1.1142179kg)
Dimensions: Tube: 3.5” ( 88.9mm) Diameter x 5.125” (130.175mm) Long (including front bezel and focus knob)
Base: 5.5” (139.7mm) Diameter
Overall Height: 5.5” (139.7mm) Tall
Quick-Connect SR Interface
Connectors  Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
 Power/Video RJ-45: Supplies power to, and differential HD video from the camera
 Video Output: DE-15 connector for HD Analog Component (YPbPr) video only (No SD Support)
 IR Output: Transmits modulated or non-modulated IR signals received from the camera’s IR
receiver
 RS-232 IN RJ-45: Accepts RS-232 from ProductionVIEW or other external control systems
 RS-232 OUT RJ-45: Sends RS-232 from Quick-Connect SR to the camera
Power Supply 24 VDC, 2.0 Amp
Dimensions (H x W x D) 1/3 Rack Size - 1.6” (40.64mm ) H x 5.5” (139.7mm) W x 3.25” (82.5500000000001mm) D
Weight 0.45 lbs. ( 0.20411657 kg)
Accessory Rack Mount Adapter: 998-6000-002 - Holds three (3) Quick-Connect SR Interfaces
Planet in Front Page Header: Venus (filtered for detail)