Vaddio WideSHOT WallVIEW SR - Manual (Page 4)

WideSHOT WallVIEW SR
WideSHOT WallVIEW SR System Document Number 342-0695 Rev B Page 4 of 20
O VERVIEW :
The Vaddio WideSHOT HD camera wide angle, manual lens camera
produces amazing results for small and huddle room applications
where the distance between the camera and the subject is limited.
The WideSHOT camera was designed as a low cost, high value,
manual pan/tilt camera with a super wide-angle lens that can be set
to provide the best image possible in a small environment. To that
end, the WideSHOT camera sports a lens with 82.2° wide horizontal
field of view with a user adjustable iris, focus and varifocal zoom of
approximately 3X (3.3mm to 10.5mm). With the 3X zoom capability,
even the “big” small rooms can be covered too.
Like the ZoomSHOT™, the WideSHOT is a camera with a unique
genealogy. Designed from the ground up, the WideSHOT camera
uses the Vaddio EZCamera™ Cat-5 wiring standard for video, power
and control. Using HSDS™ (high speed differential) video outputs
over Cat-5 cable, the WideSHOT supplies a wide range of video
resolutions that are selectable from the rear panel; from 480p/59.94-
YPbPr up to and including 1080p/60. The HSDS processing allows
delivery of the HD video signals up to 150’ (45.72m).
Choose between three (3) IR frequencies for the Vaddio IR Shot
Commander remote controller to allow multiple cameras to be locally
IR controlled with a single remote. The WideSHOT also has an OSD
(on screen display) for easy set-up and basic image control that’s
accessible with the IR remote. Two (2) camera configuration presets
can be programmed and recalled via the remote or RS-232 and IR
signal forwarding is also included.
WideSHOT is paired with the tried-and-true Quick-Connect SR
Interface in this package which represents a exceptional value and a
very low price. So relax, for the next small room design, try a
WideSHOT Wide-angle HD Camera.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. The use of a power supply, other than the one provided, or
outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating
condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of
electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for proper pin-outs prior to use and connection to Vaddio product.
Image: WideSHOT HD Camera
Image: WideSHOT Rear Panel