Vaddio WideSHOT WallVIEW SR - Manual (Page 5)

WideSHOT WallVIEW SR
WideSHOT WallVIEW SR System Document Number 342-0695 Rev B Page 5 of 20
U NPACKING :
Carefully remove the product and all of the included parts from the packaging.
Identify the following parts for each camera:
WideSHOT WallVIEW SR Camera System (North America):
Part Number: 999-6910-000
 One (1) WideSHOT HD Wide-Angle Camera (998-6918-000)
 One (1) Vaddio IR SHOT Commander Remote
 One (1) Quick-Connect SR Interface
 One (1) 3-Position Phoenix-type Connector for IR Forwarding
 One (1) 24 VDC, 2.0 A Power Supply with Power Cord for North America
 One (1) Thin Profile Wall Mount with Mounting Hardware
 One (1) EZCamera™ Control Adapter (RJ-45-F to DB-9-F)
 Documentation
WideSHOT WallVIEW SR Camera System (International):
Part Number: 999-6910-001
 One (1) WideSHOT HD Camera (998-6918-000)
 One (1) Vaddio IR SHOT Commander Remote
 One (1) Quick-Connect SR Interface
 One (1) 3-Position Phoenix-type Connector for IR Forwarding
 One (1) 24 VDC, 2.0 A Power Supply
 One (1) Euro Power Cable
 One (1) UK Power Cable
 One (1) Thin Profile Wall Mount with Mounting Hardware
 One (1) EZCamera™ Control Adapter (RJ-45-F to DB-9-F)
 Documentation
Front View with Feature Call-outs
Image: WideSHOT HD PTZ Camera
1) Lens: 3.3mm to 10.5mm Varifocal HD Zoom Lens (16:9), 82.2° wide end , 27.4° tele end (approx. 3X zoom)
2) IR Sensor and Power/Tally LED: The IR sensor for the IR SHOT Commander remote is located here.
Below it is a light pipe where a blue LED power and a red LED tally reside. Both light up to produce purple.
3) Focus Knob Retention Screw: Remove screw and knob to manually set zoom and iris (see next page).
4) The
Yoke: For manual pan and tilt. Tilt range is ± 30° and Pan is limited to the service loop of the cabling.
5) Logo: Really Cool Logo Badge (RCLB). The RCLB is affixed to the base in a recessed ovoid area.
6) The Aluminum Base and Steel Cylindrical Body: Please don’t drop it on your foot, it’s fairly substantial.
①
②
③
④
⑤
⑥