Beijer Electronics NA-9379 - Manual (Page 13)

NA-9379
Specification
Revision 1.02
FnBus PIO N/A Page 13
3.1.6. 6 (0x06) Write Single Register
This function code is used to write a single holding register in a remote device. Therefore register numbered 1 is
addressed as 0. The normal response is an echo of the request, returned after the register contents have been written.
• Request
Field name Example
Function Code 0x06
Register Address Hi 0x08
Register Address Lo 0x00
Register Value Hi 0x11
Register Value Lo 0x22
• Response
Field name Example
Function Code 0x06
Register Address Hi 0x08
Register Address Lo 0x00
Register Value Hi 0x11
Register Value Lo 0x22
- In case of address 0x0800 output register value: 0x0000 changes to 0x1122.
PRELIMINARY