NaceCare Solutions ST360 - Manual (Page 10)

9
PREPARING THE MACHINE
FITTING THE DISC BRUSH
1. With the brush head lifted, centre the brush under the brush deck
2. When lowering the brush head, the brush will lock automatically.
DETERGENT SOLUTION
Fill up the solution tank with fresh water at a temperature not
exceeding 50
°
C and add the liquid detergent according to the
concentrations and instructions that are provided by the
manufacturer.
NOTE: Always use low-foam detergents. To be sure to avoid any
foam formation, before starting to operate, pour a minimum quantity
of antifoaming agent into the recovery tank. Do not ever use pure
acids.
RECOVERY TANK
Make sure the vacuum unit is properly fitted and the drain hose
cap is closed.
ST360_V05-2