NaceCare Solutions ST360 - Manual (Page 13)

12
OPERATING
Follow the operations as instructed under PREPARATION OF THE
MACHINE
1. Plug in the battery connector
2. Sit on the seat
3. Turn the key switch on.
4. Drop the brush deck down and the vacuum motor will start
automatically.
5. Open the tap by turning the knob counter clock-wise. Water only
flows when the brush motor is on.
6. To lower the brush head, push the pedal left and up. Brush and
suction start automatically. For higher pad pressure, lift the pedal
further until it locks in place. To lift the brush head, push the
pedal down until it locks in place.
7. To lower the squeegee, push the pedal right and up. To lift it, press
the pedal down until it locks in place.
ST360_V05-2