NaceCare Solutions ST360 User Manual
Page 17
16
UPON COMPLETION OF WORK
Upon completion of work and prior to any type of maintenance
procedure, carry out the following operations:
1. Close the water valve
2. Lift the brush head
3. Lift the squeegee
4. Switch the suction motor off
5. Take the machine where you intend to drain the water out
6. Turn the key to “OFF”
Take the hose off the hook, unscrew the drain plug and empty the
recovery tank. To make this operation easier, keep the hose
higher than the tank water level with one hand and with the other
hand unscrew the knob and take off the cap. By slowly lowering the
hose, the liquid will come out at the desired speed. Do this only when
wearing protection gloves to prevent contact with dangerous
solutions.
When the machine is not operating lift the squeegee to prevent
rubber bars from losing their shape.
Release the brush and clean it with a hose (For brush release,
see the following chapter “BRUSH RELEASE”).
ST360_V05-2