NaceCare Solutions ST360 User Manual
Page 9
8
PREPARATION OF THE MACHINE
SQUEEGEE
The squeegee is supplied already assembled on the machine and with the
adjustments made during machine testing.
When operating the machine, the rear rubber should be slightly tilted back
5mm all along its length. you can use the squeegee on all 4 edges before
replacing it with a new one.
To adjust the squeegee blade down, just tilt back the squeegee body by
turning the knobs counter-clockwise. To adjust the squeegee blade up,
turn the knobs clock-wise. When adjustment is completed, thighen the lock-nut.
To release the squeegee from the machine, use the lever (1) and the
squeegee is immediately released from its holder. Disconnect the
suction hose and push it towards the inside of the machine to release the
opposite side.
1
2
1
ST360_V05-2