Usb driver installation, Windows 8 – NOVUS DigiRail-VA User Manual
Page 11
DigiRail-VA
NOVUS AUTOAMTION
11/19
USB DRIVER INSTALLATION
In order to use the USB interface of the DigiRail-VA (so you can configure the equipment with the configuration
software, for example), it is necessary to install its USB driver. The installation steps can vary from computer to
computer, between different operating systems, and even between one version and another of the same operating
system.
Following are the steps and guidance screens for the driver installation.
WINDOWS 8
1. Connect the DigiRail-VA in a USB port on your computer. Windows will try to install a driver automatically and will
not succeed, because the necessary driver is not in its standard library.
2. On Desktop screen, right-click on the left-bottom corner of the screen and choose the "Control Panel" option. Then
choose the “System and Security” option, then the "System" option and, at last, "Device Manager".
3. Locate the DigiRail-VA (probably with an icon with an exclamation mark next to it) and double-click on it.