NOVUS TM-619L - Manual

DIGITAL TIMER USER’S GUIDE 619 Programming-Mode
–
619 Programming-Mode
–
This electronic 7-day timer is accurate to the minute, designed
with Control-Logic by
Graphic description, as below:
Also ,it provides 15-combination of Daily-Programs leads great
convenience to users, in use of Timer on programming it to their
demands to desired DAYS of WEEK.
6 or 8 ON/OFF(event) per day
1 . M O T U W E T H F R S A S U
2 . M O
3 .
T U
4 . W E
5 . T H
6 . F R
7 . S A
8 . S U
9 . M O T U W E T H F R
S A S U
1 1 . M O T U W E T H F R S A
1 2 . M O T U W E
1 3 . T H F R S A
1 4 . M O W E F R
1 5 . T U T H S A
B. To set CLOCK –
CLOCK DAY HOUR
MIN
PM & AM
Press and hold key and then press key, key,
key respectively to adjust clock of Timer
to current DATE, HOUR, MINUTE.
In 12-Hour-Format,
shall appear on LCD screen. In 24-
Hour-Format LCD screen shall indicate 0:00 ~23:59
P
A. RUBBER KEY’s functional description
1.
2. TIMER : Programs review & setting programs
MANUAL : To select “
, or ” ON AUTO OFF
3. : To adjust current DAY and TIME
4. : To adjust day of week
5. : To adjust Hour
6. : To adjust minute
7. : Reset Timer’s setting
8. : To indicate ON/OFF status
CLOCK
Day
HOUR
MIN
LED
Start to use Timer – Press key to reset Timer
before using
P
D. To review programs
TIMER
6 or 8 ON/OFF
Keep to press key, display on LCD screen
shall alternating display among each of
TM-619
TM-6331
Program Input(Command)
Timer’s Output
1 ~ 6/8 OFF 1 ~ 6/8 ON
C. Starts to set programs into TIMER
TIMER
HOUR MIN
TIMER
DAY
DAY
HOUR MIN
TIMER
~ 6
CLOCK
1. Press key. LCD screen shall show
2.
3. Press key , key respectively to set
desired HOUR and MINUTE for
4. Press key again, after finished setting of ,
shall appear on LCD screen.
5. Press key to select any of 15-combination
of Daily-Programs to your application demand.
Continuing to press
key, LCD shall alternating
indicate among 15-combinations.
6. Press key, key to set desired
HOUR and MINUTE for
7. When finished setting , Press key,
shall appear on LCD screen.
8. Repeat procedure stated on 1 to complete
rest of ON/OFF program-period(event)
or just to the desired number of ON/OFF(event)
setting for demand of practicable application.
9.When finished program-setting(event),
press key, Timer shall start to execute
programs.
Press key to select any of 15-combination
of Daily-Programs to your application demand.
Continuing to press
key, LCD shall alternating
indicate among 15-combinations.
DAY
DAY
1 ON
1
ON
1
ON - - : - - - - : - - - ---
2 ON - - : - - - - : - - - - - -
1
OFF - - : - - - - : - - - ---
1 OFF
1
OFF
2 OFF - - : - - - - : - - ----
8
OFF
- - : - - - - : - - ---- 1 ON - - : - - - - : - - - ---
1 OFF - - : - - - - : - - - ---
6
OFF
- - : - - - - : - - ---- 2 OFF - - : - - - - : - - - ---
1
ON - - : - - - - : - - - ---
E. How to use OVERRIDE functions
2
is effective only
under AUTO mode.
Temporary-Override –
Condition-1
ON
MANUAL
MANUAL
Condition-2 OFF
MANUAL
MANUAL
619-programming-modeTimer is designed Override
function, so as to widen its usage upon practicable
application. Override function
when
Timer is running
Follow procedure below:
When Timer ’s output status is “ ”
Pressing key, to move indicator from “ AUTO “
to “ OFF”, Timer output shall turn to “ OFF” status,
programs overrided.
Pressing
again to switch Timer status
to “ AUTO “, Timer ’s output shall continue maintaining “ OFF “.
Timer shall resume its automatic operation when next
program(event) calls for “ ON “. (With next opposite set point).
When Timer ’s output status is “ ”
Pressing key, to move indicator from
“ AUTO “ to “ ON”, timer output shall turn to “ ON” status,
programs overrided.
Pressing again to switch Timer status to “ AUTO “,
Timer ’s output shall continue maintaining “ ON “.
Timer shall resume its automatic operation when next
program(event) calls for “ OF “. (With next opposite set point)
Press and hold key and then
press key. There shall be a symbol
shows on left corner of LCD screen, to indicate this Override
in executing. When this Override is being
executed, the original programs will be stopped, and once every
10 to 120 minutes Timers shall automatically turn its output to
“ON” status. In practicable application which is applied to
home-use, this Override function also called Anti-Burglar Override.
Once again to press and hold
key, and then press key
shall terminate this Override.
Random-Start-Up Override – DAY
MIN
DAY MIN
P
Control Logic (Lithium CR 2032 memory backup, replaceable)
TM-6331H--1~4 TM-6331--1~4 TM-6331AB--1~2
TM-619--1~4 TM-619H--1~4 TM-619L--1~4