NOVUS DigiRail-2R - Manual (Page 4)

DigiRail-2R
NOVUS AUTOMATION 4/4
REGISTER 6 – DIAGNOSTIC STATE TIMER
Internally used by the DigiConfig software.
REGISTER 7 – STATE OF THE DIGITAL OUTPUTS
Bit at 0: Output deactivated
Bit at 1: Output activated
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Outlet - - - - - - - - - - - - - - 2 1
REGISTERS 12 TO 15 – DURATION OF RELAY ACTIVATION
Time, in hundredths of seconds, during which the relay stays active after an activation command. A zero time value will
keep the relay active until a deactivation command is received.
REGISTERS 20 TO 23 – TIME FOR DEACTIVATING THE RELAY (WHEN ACTIVATION TEMPORIZED)
Time, in hundredths of seconds, which remains for the relay be deactivated after an activation command.
REGISTERS 34 TO 48 – TAGS
DigiRail features some identification tags, where characters can be written in order to help identifying the device and its
outputs:
- Identification tag of the device (10 characters).
- Identification tag of the output channels (10 characters for each output).
REGISTER 62 – DIGIRAIL MODEL
Provides the code of the DigiRail model. Internally used by the DigiConfig software.
Model Amount
2A 1
2R 3
4C 4