Pathway Pathport Manager 3 User Guide - Manual (Page 11)

Pathport Manager User’s Guide
11
Windows 2000 users:
Choose <START><SETTINGS><NETWORK AND DIAL UP CONNECTIONS> to
open the network configuration dialog.
Select the connection named "Local Area Connection", and from the File or
Right-Click menus select "Properties".
Select the "General" tab, then select "Internet Protocol (TCP/IP)".
Click the "Properties" button.
Select the "Use the following IP address" radio button, and specify 10.0.0.5 as
the IP address.
Specify 255.0.0.0 for the subnet mask.
Do not specify any addresses for the DNS options. These are unnecessary for
Pathport Manager.
Click the "OK" button.
You should now Start Pathport Manager.
Mac OS X Users:
From the Dock or in the Finder under "Applications", open "System Preferences".
Under "Internet and Network", Open "Network"
Select the "TCP/IP" tab.
In the drop-down box labelled "Configure", select "Manually"
In the box labelled "IPaddress", enter 10.0.0.5
In the box labelled "Subnet Mask", enter 255.0.0.0
Click the "Apply Now" button to complete the changes.
You should now Start Pathport Manager.