Pathway Pathport Manager 3 User Guide - Manual (Page 12)

Pathport Manager User’s Guide
12
Linux Users:
As root, enter the following:
ifconfig eth0 down
ifconfig eth0 netmask 255.0.0.0 10.0.0.5
ifconfig eth0 up
Where eth0 is the name of your network interface.
You should now Start Pathport Manager.
S TARTING P ATHPORT M ANAGER
When Pathport Manager runs for the first time, it locates Network Interfaces
present on the host computer and binds to the first interface found. This may not
guarantee that Pathport Manager chooses the correct interface connected to
your Pathport network( as configured previously). To change the network
interface Pathport Manager uses, select Options -> Pathport Communications->
Set-Up on the Menu bar: