Meteor ProMover 1200 CYM - Manual (Page 5)

projector head and, slowly, rest it in the head, taking special care to avoid interference with the
electric wires of the internal wiring.
IMPORTANT:
-Before inserting the effects kit it is advisable to take out the lamp to prevent it getting damaged
during the operation.
-The effects kit must be inserted in the movable head so that the male connector is positioned in the
same side where there is the bundle of wires terminating with a female connector. Lock the four
levers of the quick lock/release devices by turning them clockwise. Grip the connector by its side
lugs, check the direction of insertion and insert if correctly into the connector on the effects kit,
forcing parallel to it, taking care not to stretch the wires.
Replacing effects kit
The instructions provided for extracting and inserting the whole effects kit are clearly useful also for
replacing it completely with another effects kit for PROMOVER 1200 CYM. For conversion into
STAGE COLOR 1200 refer to the specific manual code 099552.
Replacing color filters
Warm filter
Cold filter
Blue with hole
Yellow with hole
Red filter
4 colors filter
UV filter
Replacing glass gobos
Replacing metal gobos
Periodical cleaning
To ensure optimal operation and performance for a long time it is essential to periodically clean the
parts subject to dust and grease deposits. The frequency with which the following operations are to
be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the
reflectors, from the lenses and filters.
It is recommended that the projector undergoes an annual service by a qualified technician for
special maintenance involving at least the following operations:
.General cleaning of internal parts
.Restoring lubrication of all parts subject to friction, using lubricants specifically.
.Electrical, photometric and functional checks; eventual repairs.
CHANNEL
CHANNEL EFFECT
1 IRIS
2 COLOR
3 DIMMER
4 STROBE
5 PAN
6 TILT
7 LINEAR ZOOM
8 LINEAR FOCUS