Meteor ProMover 1200 CYM - Manual (Page 7)

Input power
*Version with electronic ballast without PFC
2200VA at 230V 50Hz
*Version with electronic ballast with PFC:
1600VA at 230V 50Hz
*Version with electromagnetic ballast:
1700VA at 230V 50Hz (p.f. correction 140uF standard).
Lamp
Discharge lamp with built-in power supply unit.
*Type HMI 1200W/S
-Cap SFc 10-4
-Color temperature 6000K
-Luminous flux 110000 Im
-Average life 750 hours
-Any working position
Motors
22 Stepper motors, operating with micro steps, totally microprocessor controlled.
Optical unit
*Twin lens condenser.
*Spherical reflector with a high luminous efficiency
*Zoom lens 16 degrees-24 degrees.
Channels
16, 17, 19 or 20 control channels
Inputs
*DMX 512
Movable body
*Movement by means of two stepper motors, controlled by microprocessor.
*Automatic repositioning of PAN and TILT after accidental movement not controlled by
control unit.
*Travel:
-PAN = 450 degrees
-TILT = 252 degrees
*Maximum speeds:
-PAN = 4.0 sec (360 degrees)
-TILT = 3.2 sec (250 degrees)
*Resolution:
-PAN =1.76 degrees
-PAN FINE = 0.007 degrees
-TILT = 0.98 degrees
-TILT FINE = 0.004 degrees
IP 20 protection rating
*Protected against the entry of solid bodies larger than 12mm (0.47”).
*No protection against the entry of liquids.