Goulds Pumps 3355 - IOM - Manual (Page 30)

Commissioning, Startup, Operation, and Shutdown
2. Put the pump-half of the coupling guard in place:
a) Slightly spread the bottom apart.
b) Place the coupling guard half over the pump-side end plate.
1. Annular groove
2. Pump-side end plate
3. Driver
4. Pump half of the coupling guard
The annular groove in the coupling guard half must fit around the end plate.
1. Annular groove
2. End plate (pump end)
3. Guard half
3. Use a bolt, a nut, and two washers to secure the coupling guard half to the end plate.
Tighten securely.
28 Model 3355 Installation, Operation, and Maintenance Manual