3 vm-1010 technical specifications, Vm-1010 technical specifications – Kramer Electronics VM-1055 User Manual
Page 10
8
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010
Note:
•
Terminate unused inputs to 75Ω, and terminate active inputs at the
connecting source
•
Remember, the output signal format matches the input signal format (for
example, if the input is composite, the output is composite)
•
All signal cables to each device should be of equal length (for example, the
R,G,B cables between a camera and the amplifier should be of equal length)
4.3
VM-1010 Technical Specifications
INPUTS:
2 composite/component video, looping, 1Vpp/75Ω on
BNC connectors with termination switch
OUTPUTS:
2x5 composite/component video, 1Vpp/75Ω on BNC
connectors
MAX. VIDEO OUTPUT:
1.8Vpp
VIDEO BANDWIDTH (-3DB):
235MHz
DIFF. GAIN:
0.2%
DIFF. PHASE:
0.04Deg
K-FACTOR: <0.05%
VIDEO S/N RATIO:
77dB
NON-LINEARITY: 0.2%
CONTROL: Level:
−1.4dB to +2.5dB, EQ.: 0 to +2.5dB @4.4MHz
COUPLING:
DC or AC (user selectable)
POWER SOURCE:
230V AC, 50/60Hz (115V USA), 10.3VA
OPERATING TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
19" x 7" x 1U W, D, H, rack mountable
WEIGHT:
1.98kg (4.4lbs) approx.
ACCESSORIES: Power
cord
Specifications are subject to change without notic