3 vm-54 technical specifications, Vm-54 technical specifications – Kramer Electronics VM-1055 User Manual
Page 25
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-54
23
Note:
•
Terminate unused inputs to 75Ω, and terminate active inputs at the
connecting source
•
Remember, the output signal format matches the input signal format (for
example, if the input is composite, the output is composite)
•
All signal cables to each device should be of equal length (for example, the
R,G,B cables between a camera and the amplifier should be of equal length)
7.3
VM-54 Technical Specifications
INPUTS:
3 composite/component video looping, 1Vpp/75Ω on
BNC connectors with termination switches
OUTPUTS: 3x18
composite/component video, 1Vpp/75Ω on BNC
connectors
MAX. VIDEO OUTPUT:
2Vpp
VIDEO BANDWIDTH (-3DB):
365MHz
DIFF. GAIN:
0.03%
GAIN RANGE:
-0.8 to 1.9dB
DIFF. PHASE:
0.09Deg
EQ. RANGE:
0 to 2.3dB @4.4MH
K-FACTOR: <0.05%
VIDEO S/N RATIO:
Better than 70dB
CONTROL: 75Ω termination switches on each input
NON-LINEARITY: 0.2%
COUPLING:
AC or DC for each channel, selectable from front panel
POWER SOURCE:
230V AC, 50/60Hz, (115V AC USA) 10VA
OPERATING TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
19" x 7" x 2U W, D, H, rack mountable
WEIGHT:
4.4kg (9.8lbs) approx.
ACCESSORIES: Power
cord
Specifications are subject to change without notic