Kramer Electronics VM-1055 - Manual (Page 4)

2 VM-1010, VM-1021, VN-1055, VM-54 - Getting Started
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
• Review the contents of this user manual
• Use Kramer high-performance, high-resolution cables
• Use only the power cord that is supplied with this machine
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
• Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
• Position your Kramer product away from moisture, excessive sunlight and
dust
Caution: There are no operator serviceable parts inside the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
Your amplifier is pre-calibrated at the factory for
transparent operation. Re-tuning it can upset signal
transparency.
Do not attempt to adjust the LEVEL trimmers without
using accompanying standard calibrated oscilloscope
or waveform monitor!
i
!