3 vm-1021 technical specifications, Vm-1021 technical specifications – Kramer Electronics VM-1055 User Manual
Page 15
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1021
13
Note:
•
Terminate unused inputs to 75Ω, and terminate active inputs at the
connecting source
•
Remember, the output signal format matches the input signal format (for
example, if the input is composite, the output is composite)
•
All signal cables to each device should be of equal length (for example, the
R,G,B cables between a camera and the amplifier should be of equal length)
5.3
VM-1021 Technical Specifications
INPUT:
1 composite video or a single component, looping,
1Vpp/75Ω on BNC connectors with termination switch
OUTPUTS:
20 composite/component video, 1Vpp/75Ω on BNC
connectors
VIDEO BANDWIDTH(-3DB):
350MHz
DIFF. GAIN:
0.1%
DIFF. PHASE:
0.07Deg
K-FACTOR: <0.05%
VIDEO S/N RATIO:
74dB
CONTROL:
Level: -1.1dB to + 2.7dB; EQ.: 0 to 2.9dB @4.4MHz
NON-LINEARITY: 0.1%
COUPLING:
AC, DC, and clamped - user selectable with front panel
switches
DC CLAMP:
0V DC black level, or sync tip
POWER SOURCE:
230V AC, 50/60Hz (115V USA), 6.7VA
OPERATING
TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
19" x 7" x 1U W, D, H, rack mountable
WEIGHT:
2.6kg (5.7lbs) approx.
ACCESSORIES: Power
cord
Specifications are subject to change without notice at