3 vm-1055 technical specifications, Vm-1055 technical specifications – Kramer Electronics VM-1055 User Manual
Page 20
18
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1055
Note:
•
Terminate unused inputs to 75Ω, and terminate active inputs at the
connecting source
•
Remember, the output signal format matches the input signal format (for
example, if the input is composite, the output is composite)
•
All signal cables to each device should be of equal length (for example, the
R,G,B cables between a camera and the amplifier should be of equal length)
6.3
VM-1055 Technical Specifications
INPUTS: 1x5
component/RGBHV/composite video, 1Vpp/75Ω on
BNC connectors, (2 of them can be either video or SYNC
1Vpp/75Ω or TTL level/510Ω)
OUTPUTS: 5x5
component/RGBHV/composite video, 1Vpp/75Ω on
BNC connectors (2 of them can be either video or SYNC
1Vpp/75Ω or TTL level/510Ω)
MAX. VIDEO OUTPUT:
2Vpp
VIDEO BANDWIDTH (-3DB):
300MHz
DIFF. GAIN:
0.1%
DIFF. PHASE:
0.1Deg
K-FACTOR: <0.05%
VIDEO S/N RATIO:
Better than 74dB
COUPLING: DC
NON-LINEARITY: 0.1%
POWER SOURCE:
230V AC 50/60Hz (115V USA), 5.3VA
OPERATING
TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE:
-45° to +72°C (-49° to 162°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
19" x 7" x 1U W, D, H, rack mountable
WEIGHT:
2.6kg (5.7lbs) approx.
ACCESSORIES: Power
cord
Specifications are subject to change without notice at