Kramer Electronics VM-1055 - Manual (Page 18)

16 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1055
Figure 8: VM-1055 Video Component Distributor Rear Panel
# Feature Function
2 75Ω Switch Selects “75Ω“or “HI-z” impedance for Hs channel. When at the "75Ω" position, the signal applied to the
connector should be analog video or sync signal. When in the “HI-z” position a TTL level sync signal may
be used
3 Hs IN BNC Connector Hs channel video input (horizontal sync)
4 Hs OUT BNC Connectors (1-5) Hs channel amplified and buffered video outputs
5 75Ω Switch Selects “75Ω“or “HI-z” impedance for Vs channel. When at the "75Ω" position, the signal applied to the
connector should be analog video or sync signal. When in the “HI-z” position a TTL level sync signal may
be used
6 Vs IN BNC Connector Vs channel video input (vertical sync)
7 Vs OUT BNC Connectors (1-5) Vs channel amplified and buffered video outputs that are identical to each other and to the input
8 R IN BNC Connector R channel video input
9 R OUT BNC Connectors (1-5) R channel amplified and buffered video outputs that are identical to each other and to the input
10 G IN BNC Connector G channel video input
11 G OUT BNC Connectors (1-5) G channel amplified and buffered video outputs that are identical to each other and to the input
12 B IN BNC Connector B channel video input
13 B OUT BNC Connectors (1-5) B channel amplified and buffered video outputs that are identical to each other and to the input
14 Power Connector AC connector and fuse enabling power supply to the unit
16
VM-1010, VM-1021
, V
N
-10
55, VM-54
– The
VM-105
5 V
ideo C
o
mponent Di
stri
butor