Kramer Electronics TP-410 - Manual (Page 17)

14 TP-410 - Connecting the TP-410
Use your PC initially to configure the Ethernet settings using K-UPLOAD software.
When configuration is complete, set the DIP-switches to their previous position and
then turn the power Off and On again.
The latest version of K-UPLOAD and installation instructions can be
downloaded from the Kramer Web site at www.kramerelectronics.com
5.5 Connecting Several TP-410 Units
You can daisy chain up to 15 TP-410 machines, as illustrated in Figure 7 .
Figure 7: Connecting Multiple TP-410 Units
i