3 setting the rs-485 bus termination, Setting the rs-485 bus termination, Figure 14: tp-410 dip-switch rs-485 termination – Kramer Electronics TP-410 User Manual

Page 24: On 7.3

Advertising
background image

TP-410 - The SETUP DIP-switches

21

21

7.3

Setting the RS-485 Bus Termination

The DIP-switch sets the RS-485 bus termination. Only the first and last physical

devices on the RS-485 bus must be terminated (set to ON), all other devices must

be set to OFF.

Figure 14: TP-410 DIP-switch RS-485 Termination

Advertising
See also other documents in the category Kramer Electronics Accessories for electrical: