Kramer Electronics VP-12x8 User Manual
Page 16
Connecting the VP-12x8
13
6. Select Use the following IP Address, and fill in the details as shown in
Figure 6.
7. Click
OK.
Figure 6: Internet Protocol (TCP/IP) Properties Window
6.3.2
Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the
VP-12x8 to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
6.3.3
Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the Master unit
(MACH NO. 1) via the Ethernet port to the LAN port of your PC. Use your
PC initially to configure the settings (see section 6.3).
For detailed instructions on how to install and configure your Ethernet port,
see the “Ethernet Configuration (FC-11) guide.pdf” file
on our Web site:
http://www.kramerelectronics.com