Kramer Electronics VP-12x8 User Manual
Page 27
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Flash Memory Upgrade
24
3. Connect the power on your machine.
8.2.3
Upgrading Firmware
Follow these steps to upgrade the firmware:
1. Double click the KFR-Programmer desktop icon.
The KFR-Programmer window appears (see Figure 16).
Figure 16: The KFR-Programmer Window
2. Select the required COM Port
1
.
3. Press the File button to select the .s19 firmware file included in the
package.
4. Press the Send button to download the file. The Send button lights red.
5. Wait until downloading is completed and the red Send button turns off.
6. Disconnect the power on the
VP-12x8.
7. Set the ETHERNET PROGRAM/NORMAL switch, located on the
machine underside, to NORMAL.
8. Connect the power on your machine.
1 To which the VP-12x8 is connected on your PC