Kramer Electronics VP-12x8 - Manual (Page 32)

Kramer Protocol 2000
29
NOTE 12 - Under normal conditions, the machine's present status is saved each time a change is made. The "power-down"
save (auto-save) may be disabled using this code. Note that whenever the machine is turned on, the auto-save function is set.
NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as 1, the
machine will send its name. The reply is the decimal value of the INPUT and OUTPUT. For example, for a 12x8, the reply to
the request to send the audio machine name would be (HEX codes):
7D 96 90 81 (i.e. 128dec+ 12dec for 2nd byte, and 128dec+ 8dec for 3rd byte).
NOTE 14 - The number of inputs and outputs refers to the specific machine which is being addressed, not to the system. For
example, if a 12X8 matrix is configured, the reply to the HEX code
3E 82 81 82 (ie. request the number of outputs)
would be HEX codes
7E 82 88 82
ie. 8 outputs
NOTE 16 - The reply to the “ REQUEST WHETHER PANEL IS LOCKED” is as in NOTE 4 above, except that here the
OUTPUT is assigned with the value 0 if the panel is unlocked, or 1 if it is locked.