Kramer Electronics VP-12x8 - Manual (Page 20)

Operating the VP-12x8
17
7.3.3 Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate IN button.
This erases that specific input/output configuration from the memory,
leaving it empty and available 1 .
7.4 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock 2 your VP-12x8. Unlocking releases the
protection mechanism.
To lock the
VP-12x8:
Press the LOCK button for more than two seconds, until the LOCK
button is illuminated
The front panel is locked. Pressing a button will have no effect other than
causing the LOCK button to blink 3
To unlock the VP-12x8:
Press the illuminated LOCK button for more than two seconds, until the
LOCK button is no longer illuminated
The front panel unlocks
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
2 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer
RC-IR1 / RC-IR2 Infra-Red Remote Control Transmitter
3 Warning that you need to unlock to regain control via the front panel