Kramer Electronics VP-12x8 - Manual (Page 17)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-12x8
14
7 Operating the VP-12x8
This section describes:
The 7-segment display (see section 7.1)
How to confirm settings (see section 7.2)
How to store and recall IN/OUT combinations (see section 7.3)
How to lock the front panel buttons (see section 7.4)
7.1 Displaying Unit Characteristics
The STATUS 7-segment display shows two sets of information, as defined in
Table 5:
Table 5: STATUS 7-segment Display
The STATUS Display Shows:
Initial Displays
The machine name
appears after powering
the unit, followed by the
firmware version and the
machine number 1
Normal Display
Normal display (during
normal operation):
Inputs switched to the
outputs 2
7.2 Confirming Settings
You can choose to work in the At Once or the Confirm mode.
In the At Once mode (the TAKE button is not illuminated):
Pressing an OUT-IN combination implements the switch immediately
You save time as execution is immediate and actions require no user
confirmation
No protection is offered against changing an action in error
1 The example shown here is for firmware version 1.0 and for machine number 1
2 The example shown here is for: input 7 connected to output 1; input 12 connected to output 2; input 8 connected to output 3
and so on