Kramer Electronics VP-770 - Manual (Page 25)

20 VP-770 - The OSD Menu
6.2 The Input Menu
Figure 8: Input Menu
Setting Function
Display Mode
Select the display mode (see Figure 9 ):
Single Window – single window mode operation with one channel
displayed E
Picture in Picture (PiP) – dual window mode operation, a smaller window
superimposed over a full screen image (see Section 7.2 ) E
Picture + Picture (PoP) – dual window mode operation, both images
appear side-by-side and the aspect ratios of both images are maintained
(see
Section 7.2 ) E
Split (SbS) – dual window mode operation, both images are placed side-by-
side with the same height (see Section 7.2 ) E
When selecting the dual window mode, set the Main window or the PiP window
parameters via Misc -> OSD -> Window Control (see
Section 6.8 )
Note that while browsing the OSD menu in the dual window mode, pressing the
PIP button will instantly toggle the window control (between Main and PiP)
Customized –customized image size E
Note that any change in the output resolution may cause
disproportion or even cancel the window customization.
Input Source Select the input source: HDMI1, HDMI2, PC1, PC2, COMP, CV1, CV2 or
DP
M / P
Note that SDI is not applicable to the VP-770 and appears
transparent in the OSD. The commands related to SDI in the
OSD
menu are therefore grayed out.
If the transparency of the OSD menu is set to ON this menu item will become
invisible (see
Section 6.8 )
Note that any change in the input source may cancel the freeze
and blank settings.
i
i
i