Kramer Electronics VP-770 - Manual (Page 32)

VP-770 - The OSD Menu 27
27
6.3 The Audio Menu
Figure 17: Audio Menu
Setting Function
Volume Set the input/output volume level [dB], see Figure 18 E . Set the:
Input Volume [dB] – to adjust the audio input level
Output Volume [dB] – to adjust the audio output level
The output audio level can also be set via the + and – buttons on the front
panel buttons (when not in the OSD mode) and/or the IR remote control
transmitter buttons (see
Section 8.7 )
Mic Volume [dB] – to adjust the Microphone audio level
Balance Set the balance [ratio] E
Treble Set the treble [dB] E
Bass Set the bass level [dB] E
Mic Effects Set the:
Mic Talkover Depth [%]
– to determine the decrease of the audio level
during microphone takeover (press + to further decrease the talkover audio
output level; press
– to lessen the talkover output audio decrease level) E
Mic Talkover Trigger [dB] – to determine the microphone threshold level
that triggers the audio output-level decrease E
Mic Mix [dB] –set to 1 to enable the Talkover mode or set to any other value
to decrease the Mic volume without changing the Line out volume level.
In the Mix mode, set the
Line Mix [dB]
– to decrease of the line out volume level without changing the
Mic volume level
The microphone input can be output along with the audio output in the
Talkover (default) mode or the Mix mode, separately or together.
In the Talkover mode (Mic Mix is set to 1), the audio output volume level
decreases when the microphone is used and it returns back to its original set
level when the microphone input is inactive.
In the Mix mode, the microphone input is mixed with the audio output at a set
level. You can also set the Line Mix separately.