Kramer Electronics VP-770 - Manual (Page 38)

VP-770 - The OSD Menu 33
33
Setting Function
Output
continued
Note that Follow Output sets the Deep Color of the HDMI and the DGKat
outputs independently, according to the screen connected to each output
A change in the Deep Color setting will take effect after there is a
hot plug on the HDMI/DGKat output or if the user selects a new
output resolution.
Color Space – to RGB, YPbPr422 or YPbPr444
HDCP Mode
Define the HDMI out HDCP activation policy. Set to:
Follow Input
– to activate the HDCP on all HDMI outputs in the case that the
video on the Main or PiP window is HDCP encrypted.
Follow Output (This option is recommended when the HDMI output is
connected to a splitter/switcher)
– to activate the HDCP per output according to
the setting of the HDMI acceptor to which it is connected; that is, if the HDMI
acceptor is not HDCP compliant, the VP-770 always outputs without HDCP and
vice versa.
Not that the VP-770 will output a green screen if the output acceptor to which it
is connected is not HDCP compliant, in the case that the video on the Main or
PiP window is HDCP encrypted.
Zoom
Position Set H Position and V Position, the horizontal and vertical zoom positions
respectively, to zoom into certain areas of the image
M / P
Lets you “move” the zoom area (same as scanning an area with a magnifying glass)
Zoom Set the zoom M / P
Zooms into the center of the display.
When zooming in the Freeze state, in case the input resolution is larger than the
output resolution, the image may be cut-off or change its position. This can be fixed
via Zoom Position (above).
Note that any change in the output resolution will cancel the zoom setting.
6.7.1 Selecting the Correct Aspect Ratio
You can configure the aspect ratio of any output image to fit your application. The
VP-770 offers four different aspect ratio settings: Follow Input, Follow Output, Best
Fit and Letterbox. Here is how each of these settings works.
FOLLOW INPUT – The aspect ratio and resolution of the
input video or graphics signal are both preserved (no
scaling). For example, a composite video image with a 4:3
aspect ratio will appear with the same aspect ratio on a
1080p (16:9) output image, surrounded by black bars
FOLLOW OUTPUT – The aspect ratio and resolution
of the input signal is re-sized to precisely match the
aspect ratio and resolution of the VP-770 output
signal. This may result in some distortion to the input
signal images
i
i