Kramer Electronics VP-770 - Manual (Page 52)

VP-770 - Controlling the VP-770 47
47
8.2 Controlling via the OSD Menu
You can change PiP Window parameters, main window parameters and entire
system parameters via the OSD menu, as described in Section 6.8 .
8.3 Controlling via the VP-770 Web Pages
You can remotely operate the VP-770 using a Web browser via the Ethernet
connection (see Section
8.5
). To be able to do so, you must use a supported Web
browser:
For Windows 7:

Chrome version 25

Internet Explorer version 9

Firefox version 15
For Mac:

Chrome version 25

Safari 6

Firefox version 20
8.3.1 Connecting to the VP-770 via your Browser
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see Section
6.8
), the Web pages may not function properly.
Make sure that your PC is connected via a network to the VP-770 and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
The default IP number is 192.168.1.39, and may be changed by the system
integrator
Figure 27: Entering the IP Number in the Address Bar
i