Kramer Electronics VP-885 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VP-885
6
Table 2: VP-885 Front Panel Features
# FEATURE FUNCTION
1 IR Receiver LED lights yellow when receiving signals from the Kramer infrared
remote control transmitter
2 POWER LED LED lights green when the unit is ON
3 OUTPUT SELECTOR
Buttons
Select the output to which the input is switched
4 INPUT SELECTOR
Buttons
Select the input to switch to the output
5 INPUT STATUS Display Displays the selected input switched to the output (marked above each input)
6 LOCK Button Press to disable/enable all buttons on the front panel
7 AUDIO LEVEL Buttons Lights when pressed and actions relate to audio
8 AFV Button Lights when pressed and actions relate to the video and audio channels. The
audio channels follow the video channels
9 AUDIO Button Lights when pressed and actions relate to audio
10 VIDEO Button Lights when pressed and actions relate to video
11 TAKE Press to toggle between the Confirm mode 1 and the At Once mode (see
Section 7.3
12
)
RCL Button Press the RCL button followed by an INPUT button 2
13
to recall a setup from the
non-volatile memory
STO Button Press the STO button followed by an INPUT button 2 to store the current
settings
14 OFF Button An OFF-OUTPUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
15 ALL Button Press ALL followed by an INPUT button to connect that input to all the outputs
1 When in the Confirm mode, the TAKE button flashes
2 In this case the INPUT button corresponds to the setup address number