Kramer Electronics VP-885 - Manual (Page 21)

Connecting the VP-885
17 17
address 1 or the machine name
The default IP address is 192.168.1.39 and the default name for the
unit is KRAMER_XXXX 2
 Serial, if you are connected via a serial port. Select the COM port
from the Select Port drop-down list.
4. Click OK.
The Device Properties window appears.
Figure 12: Device Properties Window
5. Make the required changes.
6. Click Set to save changes, or click Close to exit without saving the
changes.
1 The default IP address is 192.168.1.39
2 The four digits are the last four digits of the machine’s serial number.